Intake manifold suitable for your Piaggio Ciao, Si or Bravo moped / moped for mounting a 16 / 16 SHA carburetor on the Speed Engine racing case.
With this inlet manifold, the Pinasco 16 / 16 SHA racing carburetor can be installed cleanly on the Polini Speed Engine racing case. The straight design creates a practical solution in the tight installation space and enables use in an inconspicuous variant. This allows you to exploit the potential of your carburetor without sacrificing a clean installation.
Notes:
The intake manifold already included with the Speed Engine racing case is not ideal in terms of its diameter. The alternatively available angled versions are also often not ideal and leave the carburettor and air filter protruding from the frame.
The matching plastic bushing supplied with the 16 mm carburettor must be used for installation.
The matching racing carburetor and housing can be found in the accessories section.
A quality product manufactured in Switzerland.
| Color | silver |
| Material | Aluminum |
| Mounting type | Screws |
| Total length | 48.1 mm |
| Ø External connection | 19 mm |
| Hole spacing inlet | 36 mm |
| Ø inside | 16 mm |
| Total height | 18.8 mm |
| Thread type | M5x0.8 (standard thread) |
| Camouflaged | No |
| Number of fixing points | 2 pcs |
| Piaggio | Ciao - PX , C24 Si Bravo / Super Bravo Grillo |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.00
EUR 2’600.00/l
Polini Speed Engine engine housing electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Height: 104 mm · Width: 175 mm · Total length: 215 mm · Stock number: 6202 · Manufacturer: Polini · Material: Aluminum · Surface: sandblasted · Color: silver · Crankshaft stroke: 43 mm · Ignition type: Electronic
EUR 249.00
Polini Speed Engine engine case breaker ignition | Piaggio Ciao, SI, Bravo, Boxer
Stock number: 6202 · Manufacturer: Polini · Material: Aluminum · Surface: sandblasted · Color: silver · Crankshaft stroke: 43 mm · Total length: 215 mm · Width: 175 mm · Height: 104 mm · Ignition type: Breaker
EUR 249.00
Elring medium-strength threadlocker EL-Loc 43 blue 10 ml
Manufacturer: Elring · Temperature resistance (min.): -55 - 180 °C · Material to be used: Metal · Contents: 10 ml · Area of application: Chemistry · Color: blue · Adhesion: medium strength · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 15 N/m · Breakaway torque (according to material): 25 N/m
EUR 16.50
EUR 1’650.00/l
Pinasco 16/16 SHA carburetor hand choke | Piaggio Ciao PX / C24, Bravo, SUPERbravo
Nominal diameter: 16 mm · Total length: 45 mm · Width: 60 mm · Height: 122 mm · Manufacturer: Pinasco · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: silver · Area of application: Tuning · Carburetor type: SHA (Piaggio) · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.5 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 79 · Ø Internal connection: 16 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Ø Air filter connection: 50.5 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Camouflaged: No
EUR 118.50
Pinasco 16/16 SHA carburetor hand choke | Piaggio SI, Boss, Grillo
Nominal diameter: 16 mm · Manufacturer: Pinasco · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Area of application: Tuning · Color: silver · Choke control: Hand choke · Total length: 45 mm · Nozzle size: 79 · Height: 122 mm · Ø without reducing sleeve: 21 mm · Width: 60 mm · Ø Internal connection: 16 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Ø Air filter connection: 50.5 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.5 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M5x0.8 (standard thread)
EUR 118.50
Explore categories from Carburetor & intake system
Moped fans also bought
- 10 %
Hot 
swiing® revival screw-in condenser | Bosch / Ducati
Manufacturer: swiing® revival parts · Capacity: 0.16 µF · Area of application: Original · Area of application: Standard · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Height: 23 mm · Ø outside: 18 mm · Total height: 32 mm · Thread type: M3x0.5 (standard thread) · BOSCH OEM number: 2 207 330 050
EUR 11.80
EUR 10.60
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
