Light coil with 12 volt for HPI racing ignitions suitable for your moped, moped and small motorcycle.
The light generation coil is used when a racing ignition without light is to be retrofitted.
Number of mounting holes: 2 pieces
Hole spacing: 49 mm
Power output max. 10 W at 12 V
Alternative racing ignitions with light and other add-on parts can be found in the accessories section.
Branded product from the manufacturer HPI – Horse Power Ignition.
| Manufacturer | HPI |
| Tension | 12 V |
| Mounting type | Screws |
| Hole spacing | 49 mm |
| Number of fixing points | 2 pcs |
| Area of application | Performance, Racing, High End, Tuning |
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Tomos | A3 |
| DKW | |
| Hercules | |
| Kreidler | Flory MF / MP Foil |
| Zündapp | 434 Chassis (mountaineer) 247 Motor 278 Motor |
| KTM | |
| Rixe |
Accessories & related products
HPI racing ignition 12V with light 60W
Ø cable: 7 mm · Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Light coil voltage: 12 V · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Internal flywheel: 61.5 mm · Weight: 340 g · Ø Flywheel outside: 71.5 mm · Number of fixing points: 6 pcs
EUR 355.80
HPI racing ignition clockwise without light
Manufacturer: HPI · Area of application: Tuning · Material: Aluminum · Material: Steel · Direction of rotation: left · Direction of rotation: right · Weight: 424 g · Ø mounting plate: 90 mm · Ø Flywheel outside: 62 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 3 pcs
EUR 332.10
HPI flywheel (Bosch / Ducati)
Manufacturer: HPI · Material: Steel · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Cone length: 28 mm · Cone ratio: 1:5 · Weight: 337 g · Ø Flywheel outside: 71.5 mm
EUR 113.80
Not in stock
HPI stator ignition
Performance: 60 W · Manufacturer: HPI · Material: Aluminum · Surface: anodized · Ø inside: 27.5 mm · Ø outside: 90 mm · Color: black · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Tension: 12 V · Number of cables: 4 pcs · Cable length: 640 mm · Number of fixing points: 6 pcs · Ø bolt circle: 80 mm
EUR 177.90
HPI racing ignition 12V with light breaker housing | Piaggio Ciao, SI, Bravo, Boxer
Performance: 60 W · Manufacturer: HPI · Area of application: Tuning · Light coil voltage: 12 V · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 140 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 4 pcs
EUR 415.20
HPI racing ignition 12V with light 60W | Sachs 504, 508
Performance: 60 W · Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Light coil voltage: 12 V · Direction of rotation: left · Direction of rotation: right · Weight: 344 g · Ø mounting plate: 82 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 4 pcs
EUR 379.60
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Ø cable: 7 mm · Manufacturer: HPI · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm
EUR 444.80
Moped fans also bought
ESJOT Gear Ring, 37 Teeth, 4-Hole Coaster Brake, Black
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: powder-coated · Number of teeth: 37 pcs · Thickness: 4.1 mm · Ø inside: 94 mm · Color: black · Number of fixing points: 4 pcs · Ø mounting hole: 6.4 mm · Hole spacing: 74 mm · Ø bolt circle: 105.5 mm
EUR 62.80
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Area of application: (Dis)assembly tool · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Strength class: 8.8
EUR 11.80
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
EUR 2.85
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain type: 415H · Chain lock type: Spring lock · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1448 mm · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 22.40
Working late? Evening hours on Thursday until 20:00
