Racing clutch from HK Tuning suitable for Puch Maxi mopeds/mopeds with E50 engine.
The tuning clutch is equipped with a reinforcing ring, reinforced springs and Kevlar linings.
From the factory, this racing clutch is set to an engagement speed of 7200 rpm and balanced so that all the linings engage simultaneously.
In contrast to the previously available HK clutch with aluminum arms, this version uses steel arms. This results in more contact pressure and makes this racing clutch a must-have product for heavily tuned engines.
Thanks to the built-in starter clutch lining, your moped / moped can still be started without a pull starter.
Ø outer: 93.3 mm
Thickness: 21 mm
Number of jaws: 3 pieces
Material: steel
You can continue to use your original clutch basket or one of the accessories.
Quality product from the Dutch manufacturer HK Clutches.
Details
| Manufacturer | HK Clutches |
| Material addition | Aramid (known as Kevlar®) |
| Area of application | Racing, High End, Cross |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Number of springs | 3 pcs |
| Ø outside | 93.3 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Area of application: Racing · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.3 mm · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Ø outside: 93 mm
EUR 366.90
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Surface: galvanized (blue) · Area of application: High End · Area of application: MX · Area of application: Racing · Material addition: Steel · Area of application: Tuning · Thickness: 19 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø outside: 92.5 mm
EUR 224.80
Not in stock
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Material: Steel · Material addition: Composite materials · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 21.2 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Number of springs: 3 pcs · Ø outside: 93 mm
EUR 497.10
MBR clutch basket 19 teeth Racing angled | Puch E50
Manufacturer: MBR · Material: Steel · Color: silver · Area of application: Tuning · Toothing type: helical toothed · Recording type: Interlocking · Ø inside: 15 mm · Ø inside: 17 mm · Number of teeth: 19 pcs · Ø outside: 100.5 mm · Ø Receptacle: 31.1 mm · Height: 49 mm
EUR 218.90
MBR clutch basket 18 teeth Racing straight | Puch E50
Manufacturer: MBR · Material: Steel · Area of application: Tuning · Toothing type: straight toothed · Recording type: Interlocking · Ø inside: 15 mm · Ø inside: 17 mm · Number of teeth: 18 pcs · Ø outside: 99.5 mm · Ø Receptacle: 31 mm · Height: 49 mm
EUR 218.90
Clutch basket 21 teeth needle bearing lightened | Puch E50
Material: Steel · Color: graphite colors · Area of application: Tuning · Toothing type: helical toothed · Recording type: Interlocking · Ø inside: 15 mm · Number of teeth: 21 pcs · Ø outside: 99.6 mm · Ø Receptacle: 30.5 mm · Height: 49.5 mm
EUR 147.90
Not in stock
Moped fans like you also bought:
GPO gasket set | Puch E50
Number of components: 7 pcs · Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11.70
MBR clutch basket 18 teeth Racing straight | Puch E50
Manufacturer: MBR · Material: Steel · Area of application: Tuning · Toothing type: straight toothed · Recording type: Interlocking · Ø inside: 15 mm · Ø inside: 17 mm · Number of teeth: 18 pcs · Ø outside: 99.5 mm · Ø Receptacle: 31 mm · Height: 49 mm
EUR 218.90
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Manufacturer: MVT Allumage · Manufacturer: swiing · Area of application: Tuning · Tension: 12 V · Performance: 65 W · Direction of rotation: left · Ø mounting plate: 96 mm · Ø cable: 7 mm · Ø Flywheel outside: 49.2 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Weight: 268 g
EUR 432.00
swiing® ingenious pull starter | Puch E50 MVT ignition
Width: 150 mm · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Color: black-matt · Surface: chrome-plated · Surface: raw · Ignition system: MVT Allumage · Total length: 170 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Height: 82 mm · Hole spacing: 138 mm
EUR 177.50
Collection only possible with online purchase and appointment.
