profile
All wishlists Community wishlists
Hot Hot
Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
logo_gpo

For: Puch

35825

GPO 43.5 mm cylinder kit (Metrakit replica) | Puch

EUR 171.90

Incl. 21% VAT.

Optionally suitable

Description

The legend is back! The legendary 43.5 mm Metrakit racing cylinder from days gone by has risen like a phoenix from the ashes and ignites a new fire in your Puch Maxi S, N, X30 Sport NS, NL and Supermaxi LG1 and LG2 moped / moped.

The aluminium cylinder with grey cast iron liner is an optimized replica of the original Metrakit racing cylinder. The timing has been revised compared to the original and provided with more advance, making the well-known piston sticking problem due to high heat development a thing of the past. In addition, the cylinder height has been precisely adapted so that the extra-thick base gasket previously required is now superfluous.

This GPO racing cylinder is one of the strongest and most powerful in its class and has been extensively tested. It impresses with ample torque across the entire power band and offers an impressively powerful performance. Thanks to the optimizations compared to the original, the cylinder also achieves a noticeably higher engine speed, which ensures even more power and driving pleasure.

To get the full power out of this tuning cylinder, we recommend at least a 15 mm carburetor. However, you can achieve significantly more power with a 17 mm carburetor. Thanks to the generous 19 mm intake, you have sufficient scope for optimum power delivery.

GPO 43.5 mm Cylinder (Metrakit Replica) | Puch

For: Puch

GPO 43.5 mm Cylinder (Metrakit Replica) | Puch

34351

Camouflaged: No · Manufacturer: GPO · Material: Aluminum, Gray cast iron · Surface: varnished · Displacement: 64 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 26 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Area of application: Tuning, Racing

GPO 43.5 mm piston (Metrakit replica) | Puch

For: Puch

GPO 43.5 mm piston (Metrakit replica) | Puch

33464

Manufacturer: GPO · Nominal diameter: 43.5 mm · Material: Aluminum · Ø outside piston (A): 43.46 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.9 mm · Curvature (D): 3.1 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring, L-ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.55 mm, 2 mm · Thick piston ring: 1.9 mm, 1.8 mm · Weight piston kit: 87 g

GPO gasket set 43.5 & 45 mm (Metrakit replica) | Puch

For: Puch

GPO gasket set 43.5 & 45 mm (Metrakit replica) | Puch

35821

Manufacturer: GPO · Material: Sealing carton, Aluminum, Graphite / Graphite · Number of components: 4 pcs · Thickness: 0.4 mm, 0.5 mm, 2.6 mm · Ø cylinder: 43.5 mm, 45 mm · Hole spacing inlet: 38 mm · Ø outlet inside: 26.5 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 X 44

swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Solex · Tomos

swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)

10126

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Thread length: 12 mm · Strength class: 10.9 · Nominal diameter (thread): 6 mm

Quantity: 4

Puch

E50

ZA50 (air-cooled)

Z50 (X30 Sport)

Accessories & related products

Motorex 2-stroke oil semi-synthetic 1 L (for running in cylinders)
undefined

Universal

15357

Motorex 2-stroke oil semi-synthetic 1 L (for running in cylinders)

Manufacturer: Motorex · Oil type: semi-synthetic · Color: green · Contents: 1000 ml

EUR 23.60

EUR 23.60/l

swiing® ingenious 15 mm carburetor set camouflaged | Puch E50
undefined

For: Puch

19136

swiing® ingenious 15 mm carburetor set camouflaged | Puch E50

Manufacturer: swiing® ingenious parts · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Camouflaged: Yes · Nozzle size: 62 · Hole spacing inlet: 38 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning

EUR 124.50

Hot Hot
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
undefined

For: Puch

24004

swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50

Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Weight: 968 g · Number of gears: 1 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning

EUR 219.40

Not in stock

swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
undefined
angle-right

For: Puch

24961

swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport

EUR 142.30

Not in stock

Hot Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
undefined

For: Puch

32083

swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50

Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Material: Aluminum · Ø inside: 17 mm · Ø External connection: 23 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 53.5 mm · Height flange center hole: 42 mm · Total length: 38 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning

EUR 53.30

HOMOET Exhaust "RS Cigar" 28 mm Black | Puch Maxi, X30
undefined

For: Puch

33309

HOMOET Exhaust "RS Cigar" 28 mm Black | Puch Maxi, X30

Manufacturer: HOMOET · Material: Steel · Surface: powder-coated · Total length: 920 mm · Color: black · Ø Internal connection: 24.5 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Mounting type: Welded lug · Number of fixing points: 3 pcs · Flame tube attachment: Nuts & bolts

EUR 183.80

Set
swiing® ingenious 17 mm carburetor set camouflaged | Puch E50
undefined
angle-right

For: Puch

33502

swiing® ingenious 17 mm carburetor set camouflaged | Puch E50

Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Nominal diameter: 17 mm · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Mounting type: Plug connection clamped · Hole spacing inlet: 38 mm · Clamping screw torque (max.): 4 N/m · Area of application: Racing · Area of application: Tuning

EUR 213.50

Hot Hot
GPO 43.5 mm Cylinder (Metrakit Replica) | Puch
undefined

For: Puch

34351

GPO 43.5 mm Cylinder (Metrakit Replica) | Puch

Nominal diameter: 43 mm · Manufacturer: GPO · Material: Aluminum · Material: Gray cast iron · Surface: varnished · Displacement: 64 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 26 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Racing · Area of application: Tuning

EUR 112.60

swiing® ingenious resonance exhaust set Ø 28 / 70 mm camouflaged | Puch Maxi
undefined
angle-right

For: Puch

35666

swiing® ingenious resonance exhaust set Ø 28 / 70 mm camouflaged | Puch Maxi

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Total length: 730 mm · Color: Chrome · Ø Silencer: 70 mm · Ø Internal connection: 28 mm · Ø outside: 70 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Flange

EUR 183.80

Not in stock

GPO piston rings 43.5 mm (Metrakit replica) | Puch
undefined

For: Puch

35822

GPO piston rings 43.5 mm (Metrakit replica) | Puch

Manufacturer: GPO · Nominal diameter: 43.5 mm · Thick piston ring: 1.7 mm · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Height: 1.5 mm

EUR 15.30

Hot Hot
GPO 45 mm cylinder kit (Metrakit replica) | Puch
undefined
angle-right

For: Puch

35826

GPO 45 mm cylinder kit (Metrakit replica) | Puch

Nominal diameter: 45 mm · Manufacturer: GPO · Material: Aluminum · Material: Gray cast iron · Surface: varnished · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 26 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Racing · Area of application: Tuning

EUR 189.70

Hot Hot
GPO 21 mm intake manifold Dell'Orto PHBG | Puch E50 / Z50 / ZA50 (wind cooled) / ZA50 (Cat.)
undefined

For: Puch

37355

GPO 21 mm intake manifold Dell'Orto PHBG | Puch E50 / Z50 / ZA50 (wind cooled) / ZA50 (Cat.)

Manufacturer: GPO · Material: Aluminum · Ø inside: 21 mm · Ø External connection: 26 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 68.6 mm · Total length: 85.5 mm · Area of application: Racing · Area of application: Tuning

EUR 40.90

New
Metrakit Air Filter, 37/32 mm, Straight, for Dell'Orto PHBG Carburetor
undefined

Universal

39961

Metrakit Air Filter, 37/32 mm, Straight, for Dell'Orto PHBG Carburetor

Manufacturer: Metracite · Camouflaged: No · Color: black · Color: red · Material: Aluminum · Material: Rubber · Filter type: Foam · Total length: 55 mm · Length rubber part: 15 mm · Length of filter section: 22 mm · Ø Internal connection: 32 mm · Ø Internal connection: 37 mm · Ø outside: 81 mm · Mounting type: Bride · Area of application: Racing

EUR 44.50

Explore categories from Cylinder

S-10-60-030_Zylinder_Rennsatz
Cylinder & racing set
S-10-60-040_Zylinderkopf
Cylinder head
S-10-60-020_Kolben
Piston
S-10-60-010_Dichtungen
Seals
S-10-60-050_Zubehoer_Dekompressor
Decompressor & tools & accessories

Moped fans also bought

Hot Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Solex · Tomos

10126

swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread length: 12 mm

EUR 2.15

swiing® revival Stud Bolt Set M6x106 | Puch
undefined

For: Puch

10842

swiing® revival Stud Bolt Set M6x106 | Puch

Manufacturer: swiing® revival parts · Total length: 106 mm · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Nominal diameter (thread): 6 mm · Width across flats: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1

EUR 8.80

GPO 44 mm Cylinder Head Tuning, Black | Puch Maxi S, N / X30 NS, NL, N-2AH
undefined

For: Puch

26826

GPO 44 mm Cylinder Head Tuning, Black | Puch Maxi S, N / X30 NS, NL, N-2AH

Manufacturer: GPO · Material: Aluminum · Surface: varnished · Ø cylinder: 44 mm · Camouflaged: Yes · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Area of application: Tuning

EUR 50.90

GPO 43.5 mm piston (Metrakit replica) | Puch
undefined

For: Puch

33464

GPO 43.5 mm piston (Metrakit replica) | Puch

Manufacturer: GPO · Material: Aluminum · Nominal diameter: 43.5 mm · Ø outside piston (A): 43.46 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.9 mm · Curvature (D): 3.1 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.55 mm · Piston ring height: 2 mm · Thick piston ring: 1.8 mm · Thick piston ring: 1.9 mm · Weight piston kit: 87 g

EUR 59.20

GPO 45 mm piston (Metrakit replica) | Puch
undefined

For: Puch

33902

GPO 45 mm piston (Metrakit replica) | Puch

Manufacturer: GPO · Material: Aluminum · Nominal diameter: 45 mm · Ø outside piston (A): 44.93 mm · Ø piston pin (B): 12 mm · Compression height (C): 23.25 mm · Curvature (D): 2.85 mm · Total piston height (E): 49.6 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.55 mm · Piston ring height: 2 mm · Thick piston ring: 1.8 mm · Thick piston ring: 1.9 mm · Weight piston kit: 98 g

EUR 59.20

Hot Hot
GPO 43.5 mm Cylinder (Metrakit Replica) | Puch
undefined

For: Puch

34351

GPO 43.5 mm Cylinder (Metrakit Replica) | Puch

Nominal diameter: 43 mm · Manufacturer: GPO · Material: Aluminum · Material: Gray cast iron · Surface: varnished · Displacement: 64 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 26 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Racing · Area of application: Tuning

EUR 112.60

Hot Hot
GPO 45 mm Cylinder (Metrakit Replica) | Puch
undefined

For: Puch

34352

GPO 45 mm Cylinder (Metrakit Replica) | Puch

Nominal diameter: 45 mm · Manufacturer: GPO · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Material: Gray cast iron · Surface: varnished · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 26 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No

EUR 130.40

GPO gasket set 43.5 & 45 mm (Metrakit replica) | Puch
undefined

For: Puch

35821

GPO gasket set 43.5 & 45 mm (Metrakit replica) | Puch

Manufacturer: GPO · Material: Aluminum · Material: Graphite / Graphite · Material: Sealing carton · Number of components: 4 pcs · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 2.6 mm · Ø cylinder: 43.5 mm · Ø cylinder: 45 mm · Hole spacing inlet: 38 mm · Ø outlet inside: 26.5 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 X 44

EUR 17.70