High-quality 41 mm gray cast iron racing cylinder with a displacement of 57 ccm, compatible with your moped equipped with a Sachs 503 2AL, AAL, 2BL, or ABL engine.
The Pomodoro racing cylinder is one of the most powerful cylinders on the market and impresses with high torque at low RPMs, powerful acceleration, and consistent power delivery right up to high RPMs. The optimized internal design ensures good flow characteristics and enables an efficient supply of the fuel-air mixture, which supports a consistently strong power build-up.
The result is a tuning cylinder that gives your engine a noticeably greater power output and delivers dynamic performance on the road.
Thanks to the correct angle of the intake surface and the 19 mm bore, both original intake manifolds and swiing® brand intake manifolds and carburetors fit under the side guards without requiring any modifications. With a cylinder neck diameter of 45 mm, no reaming of the engine case is necessary.
The edges of all channels are smoothed, which enables optimal fuel-air mixture flow.
Differences between the Pomodoro cylinder and the original BADASS Racing cylinder when paired with a matching GPO piston:
- Either original or swiing® intake manifolds can be installed.
- The BADASS 15 mm and 17 mm intake manifolds cannot be installed.
- The cylinder cannot be adapted to a Sachs 502 or 50/2 engine.
- When used with a matching GPO piston, it achieves a longer intake valve opening duration compared to the BADASS.
Notes:
The cylinder is shipped loose and without a piston, gasket set, studs, or other mounting parts.
Replace the rubber mounts on Sachs 503 BL engines with aluminum mounts to prevent fatigue fractures at the exhaust flange under increased power. It is also recommended to use reinforced clutch springs to ensure reliable power transmission. For a further increase in performance, a 32 mm resonance muffler can be installed.
Good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
Racing version of the original Sachs and Pony part number: 0213 142 000, A1087.
| Nominal diameter | 41 mm |
| Manufacturer | GPO |
| Material | Gray cast iron |
| Area of application | Tuning, Racing |
| Displacement | 57 ccm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 45 mm |
| Ø Outlet outside | 26 mm |
| Hole spacing inlet | 32 mm |
| Outlet type | clamped |
| Camouflaged | No |
| Sachs | 503 - AAL , ABL , 2AL / 2BL |
Accessories & related products
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Diameter: 5.95 mm · Thread length: 12 mm · Strength class: 10.9 · Total length: 30 mm
EUR 2.15
GPO "Tuning" Exhaust Kit, Ø 28 / 70 mm, Chrome | Sachs 503 2AL/2BL
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 700 mm · Color: Chrome · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Plug connection clamped
EUR 118.50
Not in stock
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Color: Chrome · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Plug connection clamped
EUR 166.00
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Nominal diameter inside: 8.5 mm · Ø Bundle: 26 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Ø inside: 8.3 mm · Total length: 13 mm · Ø outside: 21.95 mm · Alternative version of the Pony OEM number: A4286 · Alternative version of the Sachs OEM number: 0251 121 000
EUR 28.40
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Ø piston pin (B): 12 mm · Ø outside piston (A): 40.94 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 41 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Weight piston kit: 86 g
EUR 47.30
GPO 43 mm "Pomodoro" cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 260.90
Explore categories from Cylinder
Moped fans also bought
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Width: 50 mm · Carburetor type: SRE · Nominal diameter: 15 mm · Total length: 66 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 94.80
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Area of application: Tuning · Color: black · Filter type: Racing screen · Width: 68 mm · Height: 52 mm · Total length: 165 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped
EUR 71.10
swiing® ingenious 15 mm intake manifold long version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Camouflaged: No · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Total height: 80 mm · Height flange center hole: 70 mm · Total length: 70 mm · Thread type: M6x1 (standard thread) · Area of application: Tuning · Pony OEM number: A2176
EUR 71.10
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Ø piston pin (B): 12 mm · Ø outside piston (A): 40.94 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 41 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Weight piston kit: 86 g
EUR 47.30
GPO 41 mm "Pomodoro" cylinder kit | Sachs 503
Manufacturer: GPO · Material: Gray cast iron · Nominal diameter: 41 mm · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning
EUR 213.50
Working late? Evening hours on Thursday until 20:00
