Fancy saddle with red imitation leather for universal use on your moped, moped and small motorcycle.
The seatbelt can be mounted on all seat tubes with an outer diameter of 22 mm and impresses with its good workmanship.
Length: approx. 470 mm
Width: approx. 240 mm
Height: approx. 200 mm
Fastening bolts at the rear: 2x M8 x 12
Fastening bolt spacing: 100 mm
The seat clamp is already mounted and included in the scope of delivery.
The support plate for mounting on the luggage carrier is not included in the scope of delivery and must be manufactured by yourself depending on the model and brand.
Other seat mounts, seat tubes and towbars can be found in the accessories section.
NOS – New from old stock.
A quality product made in Italy.
| Manufacturer | Made in Italy |
| Material | Imitation leather, Foam, Steel |
| Surface | raw, varnished |
| Color | red, black |
| Width | 240 mm |
| Spring-loaded | No |
| Total length | 470 mm |
| Height | 200 mm |
| Number of fixing points | 3 pcs |
| Hole pattern [mm] | 100 |
Accessories & related products
HAERRY trailer coupling fifth wheel short
Manufacturer: HAERRY · Ø ball: 30 mm · Material: Aluminum · Material: Steel · Surface: galvanized (blue) · Wide intake: 75 mm · Thickness: 6 mm · Thread type: MF8x1 (fine pitch thread) · Clamping diameter: 30 mm · Hole spacing: 56 mm · Total length: 160 mm · Width: 75 mm · Height: 85 mm
EUR 77.00
Bench seat long
Manufacturer: Made in Portugal · Material: Imitation leather · Material: Steel · Ø Saddle tube holder: 22 mm · Surface: galvanized (blue) · Surface: varnished · Color: black · Spring-loaded: No · Lettering: No · Number of fixing points: 2 pcs · Total length: 520 mm · Width: 180 mm · Height: 110 mm · Height: 170 mm
EUR 82.90
HAERRY trailer coupling Attachment to seat tube long
Manufacturer: HAERRY · Ø ball: 30 mm · Material: Aluminum · Material: Steel · Surface: galvanized (blue) · Wide intake: 75 mm · Thickness: 6 mm · Thread type: MF8x1 (fine pitch thread) · Clamping diameter: 30 mm · Hole spacing: 56 mm · Total length: 195 mm · Width: 75 mm · Height: 85 mm
EUR 82.90
Explore categories from Saddle
Moped fans also bought
Nut flywheel M10x1 SW15 serrated
Material: Steel · Surface: galvanized (blue) · Nut type: Flange nut · Ø outside: 19.8 mm · Nominal diameter (thread): 10 mm · Drive: External hexagon · Thread type: MF10x1 (fine pitch thread) · Width across flats: 15 mm · Height: 10.5 mm · Area of application: Standard
EUR 3.45
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Material: Aluminum · Material: Steel · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø spars: 24 mm · Total length: 335 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Ø outside: 46 mm · Mounting type: Nuts & bolts · Hole spacing: 300 mm
EUR 59.20
mk-Merch license plate holder "mofakult" plastic (CH version)
Manufacturer: mofakult Merch · Material: Plastic · Color: black · Ø mounting hole: 6 mm · Thread length: 6 mm · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs · Number of fixing points: 9 pcs · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Total length: 175 mm · Width: 108 mm · Height: 11 mm
EUR 14.10
EUR 9.40
Handlebar fork plate 26 cm "Chopper" with chrome plate
Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 22 mm · Fork plate holder length: 85 mm · Length handlebar ends: 205 mm · Clamping diameter: 22 mm · Crossbar: Yes · Ø Strut: 55 mm · Strut length: 230 mm · Mounting type: Fork plate · Width: 490 mm · Height: 260 mm
EUR 47.30
Not in stock
GPO speedo drive 17" with lugs 12 mm axle | Puch Maxi S / N, X30 Sport NS / NL, NG-2AH, X30 Velux
Manufacturer: GPO · Material: Aluminum · Thread type: MF10x1 (fine pitch thread) · Place of use: left · Place of use: right · Wheel size: 17 " · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Ø axle: 12 mm · Ø outside: 41 mm · Total height: 10 mm · Ø mounting hole: 12 mm
EUR 33.10
Working late? Evening hours on Thursday until 20:00
