Cost-effective racing exhaust suitable for your Puch Maxi S / N, Puch X30 Sport NS / NL, as well as Puch X30 NG-2AH moped / moped with straight outlet.
The Bullit exhaust system provides a good performance increase for souped-up original cylinders and smaller racing cylinders.
The muffler impresses with its good workmanship. Thanks to the silver silencer and the bare steel muffler, which has been coated with clear lacquer, the resonance exhaust looks really sporty and is an absolute eye-catcher.
Ø flame tube: 28 mm
Material: steel
Surface: painted (colorless)
Further exhaust-specific material can be found in the accessories section.
A quality product made in Portugal.
Details
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | varnished |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Cone / double cone |
| Number of fixing points | 3 pcs |
| Mounting type | Welded lug |
| Flame tube attachment | Flange |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Exhaust Bullet 28 mm chrome | Puch Maxi, X30
Ø outside: 75 mm · Manufacturer: Made in Portugal · Material: Aluminum · Material: Steel · Color: Chrome · Surface: chrome-plated · Color: silver · Total length: 865 mm · Ø Silencer: 60 mm · Number of fixing points: 3 pcs · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Flame tube attachment: Flange
EUR 65.00
HOMOET Exhaust P6 Special (longer center section) | Puch
Ø outside: 88 mm · Manufacturer: HOMOET · Material: Steel · Surface: blank · Total length: 935 mm · Ø Silencer: 50 mm · Number of fixing points: 1 pcs · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Flame tube attachment: Flange
EUR 349.10
Not in stock
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Material: Graphite / Graphite · Area of application: Tuning · Reinforced: No · Ø outlet inside: 28 mm · Ø inside: 27.4 mm · Ø screw holder: 6.6 mm · Thickness: 3 mm · Hole spacing outlet: 42.5 mm
EUR 8.75
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Total length: 730 mm · Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Flame tube attachment: Flange
EUR 142.00
Moped fans like you also bought:
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø inside: 9 mm · Ø outside: 14 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Ø wire: 2.5 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Total length: 122 mm
EUR 3.20
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Displacement: 65 ccm · Nominal diameter: 44 mm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Number of fixing points: 4 pcs · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes
EUR 106.40
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Ø outside: 61 mm · Manufacturer: GPO · Material: Metal · Material: Rubber · Color: Chrome · Color: black · Area of application: Tuning · Filter type: Grille · Total length: 113 mm · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Ø Internal connection: 20 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Camouflaged: No
EUR 15.30
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
EUR 11.70
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Ø inside: 16.2 mm · Ø outside: 20.2 mm · Manufacturer: swiing® revival parts · Material: Nylon · Color: black · Surface: blank · Bearing type: Plain bearing · Total length: 19 mm · Ø Bundle: 24.1 mm · Puch OEM number: 349.1.42.005.1
EUR 2.95
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Height: 55 mm · Width: 125 mm · Total length: 135 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Ø cylinder: 44 mm · Number of fixing points: 4 pcs · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
EUR 50.80
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Material: Graphite / Graphite · Area of application: Tuning · Reinforced: No · Ø outlet inside: 28 mm · Ø inside: 27.4 mm · Ø screw holder: 6.6 mm · Thickness: 3 mm · Hole spacing outlet: 42.5 mm
EUR 8.75
Collection only possible with online purchase and appointment.
