22 mm replica exhaust suitable for Puch Maxi S & N, Puch X30 Sport NS / NL, as well as Supermaxi LG1 / LG2 (if Puch Maxi cylinder is mounted) moped / moped.
The exhaust is a 2-piece, bolted, with corresponding Puch number.
The M7 bolt at the end of the flame tube must be locked with an additional nut, otherwise the nut may loosen and the muffler insert may fall out.
We also recommend replacing the mounted gasket between the flame tube and the muffler. You can find a high-quality replacement product in the accessories section.
Attention: The sound of the replica exhausts can be slightly louder than the originals, which can be remedied by wrapping wool around the muffler. You will find this in the accessories section below.
Original Puch spare part number: 349.1.16.000.2
A quality product made in Portugal.
Details
Manufacturer | Made in Portugal |
Material | Steel |
Surface | chrome-plated |
Color | Chrome |
Number of fixing points | 4 pcs |
Ø outside | 58 mm |
Ø Flame tube outside | 22 mm |
Exhaust type | Flute |
Total length | 920 mm |
Mounting type | Welded lug, Stud bolts & nuts |
Flame tube attachment | Flange |
Suitable for the following models
Puch | E50 |
Accessories & related products
Stop nut M7 Inox
Material: Chrome steel (known as Nirosta®) · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Nut type: Self-securing nut · Drive: External hexagon
EUR 0.85
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Width: 125 mm · Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Area of application: Standard · Ø cylinder: 38 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Candle thread: short · Height: 55 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 38.90
swiing nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Drive: Slot · Quantity: 6 pcs · Nozzle type: Main nozzle · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 18.80
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Width: 125 mm · Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Ø cylinder: 44 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Candle thread: short · Height: 55 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
EUR 50.80
swiing 15 mm carburetor tuning camouflaged | Puch
Width: 50 mm · Manufacturer: swiing · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 15 mm · Carburetor type: SRE · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Total length: 66 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 94.60
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Total length: 46 mm · Number of fixing points: 2 pcs · Ø inside: 15 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total height: 53 mm · Height flange center hole: 43 mm · Mounting type: Screws · Camouflaged: Yes
EUR 41.30