Fork bush for your moped / moped with EBR forks and 30 mm fork leg diameter.
The bush for the fork leg is made of plastic with good sliding properties. The sliding sleeve should also be greased when installed in the fork.
Ø inner: 30 mm
Ø outer: 34 mm
Length: approx. 20 mm
To fully equip a fork, you need four pieces.
Price per piece.
Branded product from the Italian manufacturer EBR.
Details
| Manufacturer | EWC |
| Material | Plastic |
| Color | black |
| Ø inside | 30 mm |
| Total length | 20 mm |
| Ø outside | 34 mm |
Suitable for the following models
| Puch |
Accessories & related products
Motorex High Pressure Grease 3000 4.5 kg
Temperature resistance (min.): -30 - 150 °C · Manufacturer: Motorex · Area of application: Chemistry · Area of application: Fat · Contents [g]: 4500 g · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous
EUR 111.20
Not in stock
EUR 24.71/kg
Moped fans like you also bought:
DR 43 mm cylinder kit 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DR Racing Parts · Material: Gray cast iron · Surface: varnished · Area of application: Tuning · Displacement: 65 ccm · Nominal diameter: 43 mm · Crankshaft stroke: 43 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Ø outlet inside: 18 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 169.20
Not in stock
DR 43 mm cylinder kit 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DR Racing Parts · Material: Gray cast iron · Surface: varnished · Area of application: Tuning · Displacement: 65 ccm · Nominal diameter: 43 mm · Crankshaft stroke: 43 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Ø outlet inside: 18 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 10 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 169.20
Not in stock
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Test mark: none · Tension: 6 V · Tension: 12 V · Housing material: Plastic · Color: black · Lens material: Plastic · Bulb holder: P26s · Width: 125 mm · Speedometer recording: 48 mm · Height: 90 mm · Depth: 147 mm · Battery operated: No · Switch included: Yes · Number of fixing points: 2 pcs · Ø External connection: 6.3 mm · Mounting type: Screws · Area of application: Original · Area of application: Standard · Piaggio OEM number: 584240
EUR 44.90
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Thread type: MF10x1 (fine pitch thread) · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Drive: Outer edge · Number of components: 3 pcs · Total length: 32 mm · Ø External head: 14 mm · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Thread length: 13 mm · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Area of application: Standard
EUR 15.30
BGS bottom bracket / bottom hole puller with slide hammer
Span: 7 mm · Number of components: 10 pcs · Span: 28 mm · Manufacturer: BGS - Do it yourself · Clamping depth: 10 mm · Clamping depth: 20 mm · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Area of application: (Dis)assembly tool · Thread type: M10x1.5 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 285 mm
EUR 153.80
Handlebar fork plate 24 cm Puch Maxi chrome
Clamping diameter: 22 mm · Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Width: 625 mm · Ø outside: 22 mm · Height: 240 mm · Fork plate holder length: 75 mm · Mounting type: Fork plate · Length handlebar ends: 150 mm · Crossbar: No
EUR 56.70
Collection only possible with online purchase and appointment.
