Hot 
Adjustable gas-pressure shock absorbers in black/gold with an adjustable coil spring for your moped, scooter, and small motorcycle.
The coil dampers offer versatile adjustment options, allowing you to optimize them for your desired riding characteristics. The stiffness or preload of the springs can be continuously adjusted up to 45 mm via a threaded mechanism.
Length (mounting point to mounting point): 320 mm
Note: The rear springs should always be secured with large U-washers to prevent the bearing sleeves from shifting when lateral forces occur.
Price per pair.
Simpler rear springs, as well as shock absorbers for motocross and mounting hardware, can be found in the accessories section.
Brand-name product from the manufacturer DMP.
| Total length | 360 mm |
| Manufacturer | DMP |
| Ø outside | 59 mm |
| Hole spacing | 360 mm |
| Material | Steel, Aluminum |
| Surface | varnished, anodized |
| Color | black, gold |
| Damping type | Spring, Pneumatic (air) |
| Adjustable | Yes |
| Ø Fastening inside | 10 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.00
EUR 2’600.00/l
YSS shock absorber Racing 35 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø Fastening inside: 10 mm · Total length: 380 mm · Mounting type: Nuts & bolts · Hole spacing: 350 mm · Number of fixing points: 2 pcs
EUR 154.10
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Number of components: 17 pcs · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Screw head: Hexagon
EUR 14.10
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
EUR 21.20
Shock absorber 34 cm fancy neon yellow
Ø outside: 50 mm · Color: black · Color: neon yellow · Total length: 375 mm · Surface: varnished · Damping type: Spring · Adjustable: Yes · Hole spacing: 340 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Ø spars: 30 mm
EUR 94.80
EUR 77.00
MKX shock absorber 34 cm black
Ø outside: 46 mm · Color: black · Total length: 375 mm · Manufacturer: MKX · Surface: varnished · Damping type: Spring · Adjustable: Yes · Hole spacing: 340 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Ø spars: 24 mm
EUR 59.20
Hot
YSS shock absorber High End 33 - 34 cm black / red (gas pressure)
Ø outside: 61 mm · Color: black · Color: red · Total length: 340 mm · Total length: 370 mm · Manufacturer: YSS · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: anodized · Damping type: Pneumatic (air) · Adjustable: Yes · Hole spacing: 330 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts
EUR 539.70
Explore categories from Shock absorber & swingarm
Moped fans also bought
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Color: gray · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 22.40
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon · Nominal diameter (thread): 10 mm · Height: 8 mm · Width across flats: 17 mm
EUR 4.65
Working late? Evening hours on Thursday until 20:00
