Racing clutch for first gear, compatible with your Tomos moped equipped with an A35 or A55 engine.
Special aramid linings are mounted on steel carriers. Compared to aluminum carriers, steel carriers provide better support and are therefore less prone to deformation, chipping, or delamination at the edges—especially during hard starts and high-performance setups.
The package includes three different spring strengths for the respective application.
Note: Secure the M6 countersunk screws of the racing clutch with Loctite after you have selected the clutch springs that match your engine. The tightening torque is 6 Nm.
A quality product from the American manufacturer Jammer Clutches.
| Manufacturer | Jammer |
| Material | Steel |
| Area of application | Racing |
| Surface | burnished |
| Material addition | Composite materials |
| Ø outside | 84 mm |
| Recording type | Interlocking |
| Number of jaws | 3 pcs |
| Number of springs | 3 pcs |
| Thickness | 14 mm, 26.6 mm |
| Ø inside | 12.2 mm |
| Alternative version of the Tomos OEM no. | 227849 |
| Tomos | A35 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.00
EUR 2’600.00/l
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Manufacturer: Malossi · Material: Spring steel · Surface: varnished · Color: red · Color: white · Color: yellow · Total length: 32.6 mm · Area of application: Tuning
EUR 35.50
Clutch Carbon 1st gear | Tomos Classic, Quadro, Sprint, Fun Sport'R
Manufacturer: Made in Europe · Material addition: Carbon · Number of jaws: 3 pcs · Ø outside: 85 mm · Recording type: Interlocking · Number of springs: 1 pcs · Thickness: 15 mm · Area of application: Racing · Area of application: Tuning · Tomos OEM number: 227849
EUR 189.70
Not in stock
Clutch Carbon 2nd gear | Tomos Classic, Quadro, Sprint, Fun Sport'R
Manufacturer: Made in Europe · Material addition: Carbon · Number of jaws: 3 pcs · Ø inside: 28.5 mm · Ø outside: 85 mm · Recording type: Interlocking · Number of springs: 1 pcs · Thickness: 15 mm · Area of application: Racing · Area of application: Tuning · Tomos OEM number: 227849
EUR 201.60
Explore categories from Clutch
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1626 mm · Chain pitch: 1/2" x 3/16" · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø bore: 4 mm
EUR 14.80
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Total length: 30 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Diameter: 5.95 mm · Strength class: 10.9
EUR 2.15
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.00
EUR 2’600.00/l
Polini jet set (100 - 118) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Nozzle type: Main nozzle · Drive: External hexagon · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110 · Nozzle size: 112 · Nozzle size: 114 · Nozzle size: 116 · Nozzle size: 118
EUR 47.30
Polini intake rubber Ø 28.5 / 25 mm (PHBG, Polini CP)
Manufacturer: Polini · Material: Rubber · Color: black · Ø inside: 28.5 mm · Ø outside: 38.5 mm · Ø Passage: 25 mm · Ø Connection 2 external: 37 mm · Ø inside 2: 25 mm · Ø External connection: 37 mm · Clamping diameter: 26.5 mm · Total length: 37.5 mm
EUR 17.70
Working late? Evening hours on Thursday until 20:00
