D6 Type BQ retaining ring for positioning components on axles that do not have a groove. Clamping rings are ideal for fastening emblems, for example on mopeds, mopeds and small motorcycles.
The sheet metal edge grips into the counterpart due to the spring preload and the crowning and thus protects against displacement.
Note: In many cases, disassembly is not possible without damage. In addition, locking elements should only be used once.
Further details in other sizes can be found in the accessories section.
| Nominal diameter | 6 mm |
| Fuse type | Outside |
| Material | Spring steel |
| Surface | blackened |
| Place of use | Universal |
| Thickness | 0.4 mm |
| Height | 2.3 mm |
| Ø outside | 16 mm |
| Ø inside | 5.75 mm |
Ratings
Accessories & related products
Explore categories from Screws & fastener sets
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Screw head: Lens head · Drive: Slot · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.30
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2000 mm · Nipple length: 5.5 mm
EUR 3.90
Olympia cylinder head for 41 - 43 mm cylinder kit | Piaggio Ciao
Manufacturer: Olympia · Material: Aluminum · Ø cylinder: 41 - 43 mm · Total length: 120 mm · Width: 78 mm · Height: 60 mm · Area of application: Racing · Area of application: Tuning · Candle thread: short · Number of fixing points: 3 pcs
EUR 29.90
Fuel tap horizontal M12x1 (with union nut) bottom outgoing | Piaggio Ciao
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Aluminum · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm · Piaggio OEM number: 189525 · Piaggio OEM number: 257073 · Alternative version of the Piaggio OEM number: 103089
EUR 11.40
Collection only possible with online purchase and appointment.
