Bing SSE 15 mm aftermarket tuning carburetor suitable for ILO / JLO mopeds / mopeds.
The racing carburetor also fits Puch MS, VS, MV and DS small engine bikes, provided the additional flange (item 23645) is used.
If necessary, small adjustments are required to ensure the air filter fits perfectly.
We recommend the adjustable nozzle (item 16038), which allows the fuel/air mixture to be optimally adjusted.
Hole spacing for cylinder connection: 32 mm
Main diameter: 14
You can find the slanted intake manifold described above, other carburetors and the innovative adjustable nozzle in the accessories section.
| Component group Carburetor | Carburetor complete |
| Nominal diameter | 15 mm |
| Carburetor type | SSE |
| Mounting type | Flange |
| Area of application | Standard, Tuning |
| Ø fuel hose connection | 6 mm |
| Choke control | Cable choke |
| Hole spacing inlet | 32 mm |
| Puch | 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| ILO / JLO |
Ratings
Accessories & related products
BING SSE carburetor 12 mm | Puch MV 50, MS 50
Nominal diameter: 12 mm · Component group Carburetor: Carburetor complete · Carburetor type: SSE · Choke control: Hand choke · Mounting type: Flange · Ø fuel hose connection: 6 mm · Hole spacing inlet: 32 mm · Nozzle size: 50 · Area of application: Standard · Area of application: Tuning
EUR 94.70
BING Original floats Bing SSB, SSE & SSN
Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SSB · Carburetor type: SSE · Carburetor type: SSN · Ø outside: 22 mm · Total length: 41.4 mm · Color: black · Height: 23 mm · Pony OEM number: A1968 · Sachs OEM no.: 0261 003 001
EUR 34.20
Not in stock
Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS
Material: Aluminum · Ø inside: 15 mm · Thread type: M6x1 (standard thread) · Mounting type: Stud bolts & nuts · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Total height: 2.7 mm · Total height: 9.7 mm · Area of application: Tuning
EUR 31.40
BING SSE carburetor 12 mm cable choke | ILO / Puch MV, MS, DS
Nominal diameter: 12 mm · Component group Carburetor: Carburetor complete · Carburetor type: SSE · Choke control: Cable choke · Mounting type: Flange · Ø fuel hose connection: 6 mm · Hole spacing inlet: 32 mm · Nozzle size: 50 · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Area of application: Standard · Area of application: Tuning
EUR 101.80
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø outlet inside: 22 mm · Number of components: 10 pcs · Area of application: Standard · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 - 38 mm
EUR 23.60
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Total length: 135 mm · Height: 55 mm · Ø cylinder: 45 mm · Number of fixing points: 4 pcs · Candle thread: short · Area of application: Tuning · Width: 125 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 39.00
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Ø outside: 35 mm · Ø inside: 15 mm · Ball bearing closed: No · Width: 8 mm · Area of application: Standard · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 29.50
Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS
Material: Aluminum · Ø inside: 15 mm · Thread type: M6x1 (standard thread) · Mounting type: Stud bolts & nuts · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Total height: 2.7 mm · Total height: 9.7 mm · Area of application: Tuning
EUR 31.40
Collection only possible with online purchase and appointment.
