Cable guide M8 | Kreidler Flory

Flame tube 16 mm | Kreidler Flory 2-speed

Total length: 520 mm · Ø inside: 13 mm · Ø outside: 16 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø External connection: 26 mm · Mounting type: Bride

Chrome ignition cover | Kreidler Flory

Material: Plastic · Surface: chrome-plated · Color: Chrome · Number of fixing points: 3 pcs

Luggage rack chrome | Kreidler Flory MF 23, 30, 34

Total length: 660 mm · Width: 200 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Hole spacing: 85 mm · Hole spacing: 150 mm · Hole spacing: 380 mm · Number of fixing points: 4 pcs

14/17x20 plastic swingarm bearing bush | Kreidler Flory, Florett, MF, MP

Total length: 24.15 mm · Manufacturer: Made in Germany · Ø inside: 14.25 mm · Ø outside: 17.2 mm · Material: Polyamide (PA) · Color: black · Ø Bundle: 21.65 mm

Flory tank sticker | Kreidler Flory

Width: 280 mm · Height: 80 mm · Manufacturer: Made in Germany · Material: Polyvinyl chloride (PVC) · Place of use: Tank (+ frame) · Color: black · Color: red · Color: white · Consistency: UV-resistant · Consistency: petrol resistant

Wiring harness | Kreidler Flory MF4 / MP1

Manufacturer: Made in Germany · Number of cables: 3 pcs · Cable bifurcation to motor: 750 mm · Switch included: No · Luster terminal: No · Cable bifurcation to lamp: 750 mm · Tail light cable length: 1180 mm

Magura cable end sleeve 5 mm (1A quality)

Surface: nickel-plated · Manufacturer: Magura · Material: Brass · Area of application: Standard · Color: silver · Ø inside: 5 mm · Ø outside: 5.5 mm · Ø Cable bushing: 2.5 mm · Total length: 12 mm

Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)

Surface: galvanized (blue) · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Cable length: 2250 mm · Nipple length: 10 mm · Piaggio OEM number: 270460

Magura set screw M6x55 SW8 lock nut SW10

Slotted: No · Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Thread length: 45 mm · Total length: 55 mm

Magura cable clamp Sachs shift/clutch arm

Surface: galvanized (blue) · Surface: nickel-plated · Width across flats SW: 6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Number of components: 2 pcs · Ø outside: 7 mm · Ø Cable bushing: 2.8 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 7 mm · Total length: 11 mm · Screw head: Hexagon · Ø shaft: 4 mm · Thread type: M4x0.7 (standard thread) · Thread length: 7 mm

Cap nut M10.5x1 back kick galvanized

Surface: galvanized (blue) · Material: Steel · Nut type: Cap nut · Drive: External hexagon · Height: 22 mm · Thread type: MF10.5x1 (fine pitch thread)

Fork piece cable holder | Puch / Sachs / Pony

Surface: galvanized (blue) · Area of application: Standard · Material: Steel · Color: silver · Total length: 27.2 mm · Puch OEM number: 320.4.40.020.0 · Sachs OEM no.: F5114

swiing® revival cable guide blower cover Inox | Sachs 50/2, 50/3, 50/4

Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®)

Magura set screw M6x34 mm lock nut SW10

Surface: nickel-plated · Slotted: No · Width across flats Screw: 8 mm · Manufacturer: Magura · Material: Brass · Ø cable holder: 3.05 mm · Ø Receptacle: 7.05 mm · Total length: 34 mm · Thread type: M6x1 (standard thread) · Width across flats nut: 10 mm · Thread length: 23 mm

swiing® ingenious brake shoes Ø 90 x 17 High End

Slotted: No · Width: 17 mm · Manufacturer: swiing® ingenious parts · Area of application: High End · Ø drum: 90 mm · Color: red · Number of springs: 1 pcs · Springs included: Yes · Ø locating bolt: 10 mm

swiing® revival cable guide speedometer cable fork (short version) | Piaggio Ciao

Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Material: Steel · Number of components: 1 pcs · Ø inside: 10 mm · Ø mounting hole: 6.4 mm · Piaggio OEM number: 560588