Bladed 41 mm (55 ccm) cylinder kit with 12 mm piston pin, suitable for your Puch X30 Velux and X30 NG-2AH moped / moped and with adaptations to your DS, MV, MS, VZ (EX50) small motorcycle
The timing was kept rather low on the cylinder, which is characterized by a very nice torque in the lower speed range.
Details:
Cast iron reproduction cylinder with Ø 41.0 mm bore
Slot-controlled
Ø 19 mm intake, 32 mm stud spacing
Optimized overflow channels
Improved timing
No need for spindling of the engine housing (Ø cylinder neck 45.0 mm)
Ø 25 mm outlet, 42 mm stud bolt spacing
Hole pattern stud bolt: 44 x 44 mm
Incl. Ø 41 mm piston from the Italian manufacturer -GOL-
Notes:
For Puch Velux engines, the slot on the housing no longer needs to be cast on thanks to the large sealing surface.
For ZA50-G engines, the housing may need to be spindled on.
The cylinder kit can also be used on DS, MV, MS, VZ (EX50) engines, provided the housing is spindled on.
Corresponding accessories such as gaskets, cylinder head, exhaust system etc. can be found in the accessories section.
Made by the BADASS brand.
| Nominal diameter | 41 mm |
| Manufacturer | BAD ASS |
| Camouflaged | No |
| Area of application | Tuning |
| Material | Gray cast iron |
| Surface | sandblasted |
| Ø cylinder neck | 44.9 mm |
| Ø outlet inside | 25 mm |
| Ø Inlet inside | 19 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 32 mm |
| Ø piston pin (B) | 12 mm |
| Decompressor | No |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 44 x 44 |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Ratings
Accessories & related products
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Area of application: Tuning · Mounting type: Flange · Mounting type: Plug connection clamped · Carburetor type: SRE · Nominal diameter: 15 mm · Choke control: Hand choke · Hole spacing inlet: 32 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm
EUR 145.60
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch X30 Velux
Color: Chrome · Ø outside: 70 mm · Total length: 730 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø Internal connection: 28 mm · Exhaust type: Cigar · Flame tube attachment: Flange · Mounting type: Screwed clamp
EUR 169.30
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 6 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Thread length: 12 mm · Width across flats: 10 mm · Strength class: 8 · Strength class: 10.9 · Drive: External hexagon
EUR 12.70
GOL piston 41 mm BAD ASS Lucifer | Puch X30 Velux, NG-2AH
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Ø outside piston (A): 40.94 mm · Compression height (C): 22.4 mm · Curvature (D): 2.4 mm · Total piston height (E): 48.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Weight piston kit: 86 g
EUR 82.80
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, M50, MS
Number of components: 4 pcs · Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø outlet inside: 27 mm · Ø cylinder: 41 mm · Hole spacing outlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing inlet: 32 mm · Area of application: Tuning
EUR 23.60
GPO Ø 41 mm "Sombrero" cylinder kit | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Material: Gray cast iron · Camouflaged: No · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 41 mm · Ø cylinder neck: 44.7 mm · Ø outlet inside: 25 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Number of fixing points: 4 pcs · Outlet type: straight · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Hole pattern [mm]: 44 x 44 · Thread outlet: M6x1 (standard thread) · Decompressor: No · Hole spacing inlet: 32 mm · Area of application: Tuning
EUR 236.90
Moped fans also bought
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Width: 50 mm · Choke control: Hand choke · Carburetor type: SRE · Height: 95 mm · Nominal diameter: 15 mm · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Total length: 66 mm · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
EUR 94.70
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Area of application: Tuning · Mounting type: Flange · Mounting type: Plug connection clamped · Carburetor type: SRE · Nominal diameter: 15 mm · Choke control: Hand choke · Hole spacing inlet: 32 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm
EUR 145.60
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, M50, MS
Number of components: 4 pcs · Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø outlet inside: 27 mm · Ø cylinder: 41 mm · Hole spacing outlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing inlet: 32 mm · Area of application: Tuning
EUR 23.60
Collection only possible with online purchase and appointment.
