Bladed 45 mm (70 cc) cylinder kit with 12 mm piston pin, suitable for your Puch X30 Velux and on your Puch X30 NG-2AH moped / moped.
The timing of the cylinder was kept rather low, which is characterized by a very nice torque in the lower speed range.
The racing cylinder kit without sealing includes cylinder & piston kit.
- Grey cast iron reproduction cylinder with & 45.0 mm bore
- Slot-controlled
- Ø 19 mm intake, 32 mm stud spacing
- Optimized overflow channels
- Improved timing
- Spindling of the engine gearbox necessary (Ø cylinder neck 49.0 mm)
- Ø 25 mm outlet, 42 mm stud bolt spacing
- Hole pattern for stud bolts: 44 x 44 mm
- Incl. Ø 45 mm piston from the Italian manufacturer GOL
Scope of delivery according to illustrations
Notes:
For the Puch Velux engines, the slot on the housing no longer needs to be cast on thanks to the large sealing surface.
For ZA50-G engines, the housing may need to be spindled on.
The cylinder kit can also be used on DS, MV, MS, VZ (EX50) engines, provided that the housing is spindled on.
Full installation instructions are enclosed.
| Manufacturer | BAD ASS |
| Material | Gray cast iron |
| Displacement | 70 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 45 mm |
| Ø cylinder neck | 49 mm |
| Ø Outlet outside | 26 mm |
| Ø outlet inside | 25 mm |
| Ø Inlet inside | 19 mm |
| Thread inlet | M6x1 (standard thread) |
| Ø piston pin (B) | 12 mm |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Number of fixing points | 4 pcs |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Hole spacing inlet | 32 mm |
| Area of application | Tuning |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Component group Carburetor: Carburetor complete · Choke control: Hand choke · Carburetor type: SRE · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Hole spacing inlet: 32 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Ø Internal connection: 20 mm
EUR 145.20
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Total length: 730 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø Internal connection: 28 mm · Flame tube attachment: Flange
EUR 168.90
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Diameter: 6 mm · Material: Steel · Drive: External hexagon · Total length: 30 mm · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Strength class: 8 · Width across flats SW: 10 mm · Strength class: 10.9
EUR 12.60
GOL Piston 45 mm BAD ASS Lucifer BigBore | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Nominal diameter: 45 mm · Ø outside piston (A): 44.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.4 mm · Curvature (D): 2.4 mm · Total piston height (E): 48.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston weight: 105 g
EUR 82.60
GPO cylinder gasket set BAD ASS Lucifer 45 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Number of components: 4 pcs · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø cylinder: 45 mm · Hole spacing inlet: 32 mm · Ø outlet inside: 27 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 23.50
Moped fans also bought
swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Bearing cage: Silver cage · Ø inside: 12 mm · Width: 16.2 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 16.2 · Tomos OEM number: 035548
EUR 16.40
swiing® ingenious flame tube 28 mm chrome | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø inside: 25 mm · Color: Chrome · Total length: 380 mm · Mounting type: Stud bolts & nuts · Ø outside: 28 mm · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
EUR 47.20
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Diameter: 6 mm · Material: Steel · Drive: External hexagon · Total length: 30 mm · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Strength class: 8 · Width across flats SW: 10 mm · Strength class: 10.9
EUR 12.60
GPO cylinder gasket set BAD ASS Lucifer 45 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Number of components: 4 pcs · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø cylinder: 45 mm · Hole spacing inlet: 32 mm · Ø outlet inside: 27 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 23.50
Collection only possible with online purchase and appointment.
