43 mm replacement piston with two 1.5 mm rectangular piston rings with flank lock (FS) for Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds with 43 mm Athena cylinder kit.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
Tolerance type: A
Note: We recommend that you check the length of the slot for the boost parts and reseat if necessary, as this often does not match the grooves in the cylinder.
The piston kit contains piston pins, piston clips and piston rings.
You will find the appropriate assembly tools, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Quality product from the Italian manufacturer Athena.
| Nominal diameter | 43 mm |
| Manufacturer | Athena |
| Ø outside piston (A) | 42.9 mm |
| Compression height (C) | 26.52 mm |
| Curvature (D) | 2.4 mm |
| Total piston height (E) | 50.4 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Ø piston pin (B) | 10 mm |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 1.5 mm |
| Tolerance group | A |
| Piston weight | 87 g |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Material: Steel · Surface: burnished · Total length: 130 mm · Manufacturer: GPO · Number of components: 7 pcs · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
EUR 23.50
Athena 43 mm cylinder kit without head 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Material: Aluminum · Surface: sandblasted · Nominal diameter: 43 mm · Manufacturer: Athena · Number of fixing points: 3 pcs · Camouflaged: No · Crankshaft stroke: 43 mm · Displacement: 63 ccm · Area of application: Tuning · Ø piston pin (B): 10 mm · Outlet type: clamped · Decompressor: Yes
EUR 206.70
Athena piston 43 mm (12 mm KoBo) #A | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: Athena · Ø outside piston (A): 42.93 mm · Compression height (C): 26.25 mm · Curvature (D): 4 mm · Total piston height (E): 52.6 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 2 mm · Tolerance group: A
EUR 75.50
Moped fans also bought
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Total length: 145 mm · Width: 105 mm · Ø mounting hole: 5 mm · Height: 5.3 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs · Thread length: 8 mm
EUR 12.90
Handlebar stem 15 cm curved with chrome strut
Manufacturer: Made in Germany · Width: 700 mm · Height: 150 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Length handlebar ends: 160 mm · Clamping diameter: 25 mm · Crossbar: Yes · Ø outside: 22 mm · Mounting type: Front boom mounting
EUR 38.90
SKF 6202 C3 ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Stock number: 6202 · Width: 11 mm · Inner ring width: 11 mm · Manufacturer: SKF · Bearing clearance: C3 · Bearing cage: "-" Sheet steel cage ball-guided · Ø outside: 35 mm · Ø inside: 15 mm · Puch OEM number: 900.4.6202
EUR 11.70
swiing® revival engine overhaul kit with bearing selection | Piaggio Ciao, SI, Bravo, Boxer
Material: NBR · Material: Oiled paper · Material: Steel · Manufacturer: swiing® revival parts · Piaggio OEM number: 112967 · Piaggio OEM number: 113681 · Piaggio OEM number: 182519 · Piaggio OEM number: 241894 · Piaggio OEM number: 480464
EUR 30.10
Collection only possible with online purchase and appointment.
