Three-piece set of gaskets for your Sachs moped / moped with 504 / 505 engine and Athena racing kit.
The gasket set consisting of cylinder base gasket and intake and exhaust gasket is suitable for the 48 mm racing kit from Athena.
The matching diaphragm gaskets, the tuning kit and other add-on parts for this cylinder kit can be found in the accessories section.
Quality product from the Italian manufacturer Athena.
| Manufacturer | Athena |
| Number of components | 3 pcs |
| Ø cylinder | 48 mm |
| Area of application | Tuning |
| Sachs | 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
Accessories & related products
Athena 48 mm cylinder kit without mounting parts | Sachs (504), 505, 508
Manufacturer: Athena · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 44 mm · Nominal diameter: 48 mm · Ø cylinder neck: 51.6 mm · Decompressor: M10x1.5 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: clamped
EUR 330.80
Athena 48 mm cylinder kit incl. diaphragm | Sachs (504), 505, 508
Manufacturer: Athena · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 44 mm · Nominal diameter: 48 mm · Ø cylinder neck: 51.8 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 19.4 mm · Ø Inlet inside: 14.7 mm · Ø Inlet inside: 17.8 mm · Inlet window: 31.9 x 36.2 · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 56/60 x 56 · Decompressor: M10x1.5 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: clamped · Outlet type: straight · Hole spacing outlet: 50 mm · Thread outlet: M8x1.25 (standard thread) · Hole spacing inlet: 32.5 mm
EUR 354.50
Athena piston 48 mm #B | Sachs 504 / 505
Manufacturer: Athena · Nominal diameter: 48 mm · Ø outside piston (A): 47.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 30.12 mm · Curvature (D): 1.94 mm · Total piston height (E): 59 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: B · Piston weight: 123 g
EUR 81.50
Athena piston 48 mm #A | Sachs 504 / 505
Manufacturer: Athena · Nominal diameter: 48 mm · Ø outside piston (A): 47.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 30.2 mm · Curvature (D): 1.94 mm · Total piston height (E): 59.05 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: A · Piston weight: 123 g
EUR 81.50
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Manufacturer: Elring · Temperature resistance (min.): -60 - 300 °C · Contents [ml]: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Gap dimension (max.): 2 mm
EUR 27.10
EUR 387.14/l
Moped fans also bought
NTN 6202 Ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: NTN · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Ø inside: 15 mm · Ø outside: 35 mm · Width: 11 mm · Ball bearing closed: No
EUR 8.15
Athena piston 48 mm #A | Sachs 504 / 505
Manufacturer: Athena · Nominal diameter: 48 mm · Ø outside piston (A): 47.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 30.2 mm · Curvature (D): 1.94 mm · Total piston height (E): 59.05 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: A · Piston weight: 123 g
EUR 81.50
Collection only possible with online purchase and appointment.
