Reproduction of the original 38 mm Puch Maxi & Puch X30 cylinder.
As with the original cylinder, a seal is also embedded here.
Attention: This cylinder is a reproduction product which is not approved for use on public roads.
The gaskets are not included in the scope of delivery
Note: Please observe the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
Quality product from the Italian manufacturer Athena.
| Manufacturer | Athena |
| Material | Aluminum |
| Camouflaged | No |
| Area of application | Tuning |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Nominal diameter | 38 mm |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 12 mm |
| Hole spacing inlet | 38 mm |
| Hole pattern [mm] | 44 x 44 |
| Thread inlet | M6x1 (standard thread) |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Number of fixing points | 4 pcs |
| Thread outlet | M6x1 (standard thread) |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Ratings
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Total length: 135 mm · Width: 125 mm · Hole pattern [mm]: 44 x 44 · Height: 55 mm · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs · Area of application: Standard
EUR 39.00
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Area of application: Standard
EUR 8.80
Athena piston 38 mm original cylinder #A | Puch
Nominal diameter: 38 mm · Manufacturer: Athena · Ø outside piston (A): 37.96 mm · Compression height (C): 22.6 mm · Curvature (D): 3.56 mm · Total piston height (E): 52.66 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Tolerance group: A · Weight piston kit: 78 g
EUR 65.20
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Width: 14.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 157 001
EUR 14.10
Explore categories from Cylinder
Moped fans also bought
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 50 mm · Mounting type: Union nut
EUR 32.60
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Total length: 135 mm · Width: 125 mm · Hole pattern [mm]: 44 x 44 · Height: 55 mm · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs · Area of application: Standard
EUR 39.00
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Area of application: Standard
EUR 8.80
Hot 
swiing® revival 12 mm carburetor "Original" | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Nominal diameter: 12 mm · Carburetor type: SRE · Choke control: Hand choke · Total length: 65 mm · Color: gray · Width: 50 mm · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Ø Output inside: 12 mm · Height: 108 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Area of application: Standard · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 82.90
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Ø inside: 12 mm · Total length: 45.5 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total height: 53 mm · Height flange center hole: 43 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Original
EUR 41.40
swiing® revival 12 mm carburetor set "Original" | Puch E50
Nominal diameter: 12 mm · Manufacturer: swiing® revival parts · Camouflaged: No · Area of application: Standard · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 52 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 38 mm · Clamping screw torque (max.): 4 N/m
EUR 112.60
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
