38 mm cylinder head, compatible with your Puch Maxi S / N, Supermaxi LG1 / LG2, and your X30 Sport NS / NL moped with an E50 / ZA50 (air-cooled) / ZA50 (catalytic converter) or Z50 engine.
The gray combustion chamber cover is perfectly suited for the corresponding AKOA 38 mm cylinders as well as for other 50 cc cylinders and features an optimized combustion chamber compared to the original. The original design is harmoniously echoed by the cast-in Puch stamp on the underside.
It is important to note that there is no decompression hole.
You can find the matching cylinder head gasket, installation hardware, and our recommended spark plugs in the accessories section.
Brand-name product from the manufacturer AKOA.
Original Puch part numbers: 325.1.10.001.1, 349.1.10.101.1, 349.1.10.301.1, 349.3.10.101.1, 349.4.10.001.1
| Width | 123.2 mm |
| Total length | 132.2 mm |
| Height | 54.5 mm |
| Manufacturer | AKOA |
| Number of fixing points | 4 pcs |
| Material | Aluminum |
| Ø cylinder | 38 mm |
| Area of application | Tuning |
| Candle thread | short |
| Hole pattern [mm] | 44 x 44 |
| Decompressor | No |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm gasket cylinder head 0.4 mm aluminum | Puch
Place of use: Cylinder head · Nominal diameter: 39 mm · Manufacturer: GPO · Material: Aluminum · Ø cylinder: 38 mm · Thickness: 0.4 mm · Ø inside: 39 mm · Ø screw holder: 7 mm · Area of application: Standard · Hole pattern [mm]: 44 x 44 · Puch OEM number: 349.3.10.013.1
EUR 2.95
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 106 mm · Nominal diameter (thread): 6 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.80
Ripp-Lock washer M6 6.2/14/1.4 galvanized
Ø inside: 6.2 mm · Ø outside: 14 mm · Material: Steel · Surface: galvanized (blue) · Nominal diameter inside: 6 mm · Nominal diameter (thread): 6 mm · Thickness: 1.4 mm · Thread size: M6 · Pony OEM number: A1542 · Alternative version of the Pony OEM number: A1644 · Sachs OEM no.: 0244 021 000 · Alternative version of the Sachs OEM number: 0245 023 002
EUR 0.85
Explore categories from Cylinder
Moped fans also bought
Hot 
swiing® revival 12 mm carburetor "original" | Puch
Nominal diameter: 12 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: gray · Carburetor type: SRE · Total length: 65 mm · Mounting type: Plug connection clamped · Width: 50 mm · Nozzle size: 52 · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Height: 108 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Standard · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Camouflaged: No · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 82.90
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø External connection: 20 mm · Mounting type: Screws · Ø inside: 15 mm · Hole spacing inlet: 38 mm · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 46 mm · Area of application: Tuning · Number of fixing points: 2 pcs · Camouflaged: Yes · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 41.40
Working late? Evening hours on Thursday until 20:00
