Cylinder cover with 38 mm combustion chamber diameter for your Puch Maxi S / N, Puch X30 Sport NS / NL, Puch X30 Sport N-2AH, as well as converted Puch Supermaxi LG1 / LG2 moped / moped.
With small cooling fins, which are cooled by ambient air (airstream).
This is the 1.2 hp version, which results in a higher compression ratio.
The cylinder head has a mount for fitting a decompressor.
Dimension (L x W x H): 13.5x12.5x5.5 cm
NOS – New from old stock.
Original Puch spare part number: 349.6.10.101.1 / 349.3.10.101.1
| Manufacturer | Puch |
| Width | 125 mm |
| Area of application | Original |
| Height | 55 mm |
| Total length | 135 mm |
| Ø cylinder | 38 mm |
| Decompressor | Yes |
| Number of fixing points | 4 pcs |
| Puch OEM number | 349.3.10.101.1, 349.6.10.101.1 |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm gasket cylinder head 0.4 mm aluminum | Puch
Place of use: Cylinder head · Thickness: 0.4 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Ø inside: 39 mm · Ø cylinder: 38 mm · Nominal diameter: 39 mm · Hole pattern [mm]: 44 x 44 · Ø screw holder: 7 mm · Puch OEM number: 349.3.10.013.1
EUR 2.95
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Diameter: 5.9 mm · Drive: External hexagon · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.75
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø cylinder: 38 mm · Ø outlet inside: 22 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 8.75
Flange nut M6 increased galvanized (strength 10)
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Flange nut · Thread type: M6x1 (standard thread) · Drive: External hexagon · Ø outside: 13.9 mm · Height: 9 mm · Width across flats SW: 10 mm · Strength class: 10
EUR 1.05
Moped fans also bought
BING Float cap Bing Original SRE, SRC, SRF, SRA
Manufacturer: BING · Ø outside: 43.5 mm · Height: 32.5 mm · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Width across flats SW: 14 mm · Piaggio OEM number: A4587 · Sachs OEM no.: 0962 056 000
EUR 22.30
swiing® revival start slide Bing SRE
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Width: 16 mm · Total length: 23.5 mm · Component group Carburetor: Choke control · Carburetor type: SRE · Height: 12.5 mm · Choke control: Hand choke · Alternative version of the Pony OEM number: A4599 · Alternative version of the Sachs OEM number: 0962 089 000
EUR 5.30
Collection only possible with online purchase and appointment.
